AQUAPRO 8270 Advance 2K Floor Finish

Code: 8270

AQUAPRO 8270 Advance 2K is a high performance, two pack, water based floor finish recommended for application to interior parquetry, timber, particleboard and cork flooring. AQUAPRO 8270 Advance 2K has exceptional abrasion resistance and excellent chemical and is available in Matt, Satin and Full Gloss . Highly suitable for commercial and high traffic environments.

Features

Features

  • Easy to apply

  • Excellent abrasion resistance

  • Excellent chemical resistance

  • Fast drying

  • Non yellowing

  • Low VOC

Specifications

Specifications

Colour: Clear
Finish: Matt, Satin & Full Gloss
Build: Medium
Sandability: Good
Solvent Resistance: Excellent
Water Resistance: Excellent
Levelling & Flow: Excellent
Coverage: 12-15m2 per litre - coverage is dependent upon the porosity of the timber
Dry Time: Recoat: 3-4 hours Walk in Socks: 4-6 hours Light Traffic: After 24 hours - refer to datasheet
Clean Up: Water

Tech Data Sheet

Tech Data Sheet

Data Sheet

Safety Data Sheets

 

Application

Application

Preparation: Fill all nail holes with a water based putty, allow to dry. Sand uncoated floor with 150-180 grade sandpaper or screenback on a flexible pad to ensure floor is uniformly dull with no sanding scratches, nibs or fur. Vacuum thoroughly. Take care to avoid scratching the surface.

Mixing: Stir thoroughly before use.

Tools: 10mm nap roller or water based applicator and high quality brush.

  • Apply a liberal first coat of AQUAPRO 8020 or FASTASEAL 3528 or 3535 using a 10mm nap roller cover and good quality brush to cut in around skirting boards and edges. Allow to dry per datasheet. To reduce the risk of tannin bleed, use FASTASEAL 3535.

  • Thoroughly sand floor with 180 grade sandpaper or screenback, remove all nibs, fluff and fur. Vacuum all dust. Take care to avoid scratching the surface.

  • Apply a coat of AQUAPRO 8270 Advance 2K. Allow to for 3 to 4 hours

  • Sand floor with 180-220 grade sandpaper or screenback. Vacuum all dust.

  • Apply the final coat of AQUAPRO 8270 Advance 2K.

Where to Use

Where to Use

  • Interior use only. Timber particleboard and cork flooring.

FEATURED ITEMS

FEATURED ITEMS

You might also like

To top