Preparing the floor to a professional standard is essential to achieve the best results. Fill all nail holes with a water based putty, allow to dry. Sand uncoated floor with 120-150 grade sandpaper or screenback on a flexible pad to ensure floor is uniformly dull with no sanding scratches, nibs or fur. Vacuum thoroughly. Take care to avoid scratching the surface.
Mixing: Stir thoroughly before use.
Tools: 6-10mm nap roller or water based applicator and a high quality brush.
1. Apply a liberal first coat of AQUAPRO 8020 or 8069 or FASTASEAL 3528 or 3535 using a 6mm or 10mm nap roller cover and good quality brush to cut in around skirting boards and edges. Allow to dry per datasheet. To reduce the risk of tannin bleed, use FASTASEAL 3535.
2. Thoroughly sand floor with 150-180 grade sandpaper or screenback, remove all nibs, fluff and fur. Vacuum all dust. Take care to avoid scratching the surface.
3. Apply a coat of AQUAPRO 8069 Hitek. Allow to dry for 1 to 2 hours.
4. Sand floor with 150-180 grade sandpaper or screenback. Vacuum all dust.
5. Apply the final coat of AQUAPRO 8069 Hitek.
