DURAPOL 5845 Low Gloss

Code: 5845-3

Premium, clear, low gloss, moisture curing polyurethane. It is a highly abrasion resistant and extremely durable coating that can be used as a final coat to achieve a subtle sheen on timber, parquetry and cork flooring. Available in Low Sheen, Super Satin and Semi Gloss.

Features

Features

  • Highly abrasion resistant

  • Extremely durable

  • Attractive subtle sheen to be used as a final coat only

  • Excellent flow and levelling results in smooth finish

  • Enhanced the natural colour of the timber

Specifications

Specifications

Finish: Low Sheen

Build: Medium

Solvent Resistance: Excellent

Water Resistance: Excellent

Levelling & Flow: Excellent

Coverage: 10-20m2 per litre - coverage of dependent upon the porosity of the timber

Dry Time: Hard Dry: Overnight Full Cure: 5-7 days - refer to datasheet

Tech Data Sheet

Tech Data Sheet

Data Sheet Low Sheen

Data Sheet Super Satin

Data Sheet Semi Gloss

Safety Data Sheets

Application

Application

Preparation: Preparing the floor to a professional standard is essential to achieve the best results. Fill all nail holes with a water based putty, allow to dry. Sand uncoated floor with 120-150 grade sandpaper or screenback on a flexible pad to ensure floor is uniformly dull with no sanding scratches, nibs or fur. Vacuum thoroughly. Take care to avoid scratching the surface.
Mixing: Stir thoroughly before use.
Tools: 6mm nap roller or applicator and a high quality brush.
  1. Timber Floor - Apply a liberal first coat of DURAPOL 5845 Super Gloss or FASTASEAL 3528 or 3535 Sealer, using a 6mm mohair roller and good quality brush to cut in. If using FASTASEAL allow to dry for 45 minutes before sanding, for all other coatings allow to dry overnight (min 8 hours to max 24 hours).
  2. Apply a second coat of DURAPOL 15845 Low Gloss. Allow to dry overnight (min 8 hours to max 24 hours).
  3. Thoroughly sand floor with 150-180 grade sandpaper or screenback, remove all nibs, fluff and fur. Vacuum all dust.
  4. Apply the final coat of DURAPOL 5845 Low Gloss.

Where to Use

Where to Use

  • Interior use only. Timber particleboard and cork flooring.

To top